Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Richard

Pages: [1] 2 3 ... 12
1
The development of economy cannot get rid of the basic construction with the steady development of China; of course, the basic construction needs a certain environmental appearance on the increasing cost of natural sand, developing limited and forbidden resource and the decreasing level of sand quality. But the commendation on the quality of sand is becoming higher and higher at this right minute, especially on the high strength raymond mill development trend and concreting aggregate, and sand produced that can satisfy the needs is becoming less and less, so that is the reason why the importance of the artificial sand is becoming more obvious than used to, which has become the main resource of the sand with good quality, so the development on the artificial sand is indispensable in the building construction, SBM Mining Machinery is one manufacturer majoring in producing all kinds of stone production line and raymond mill production line, which can provide the major technology and the installing of the equipment in your jobsites.
The put-out of the artificial sand can adopt the measure of the combination of the dry and wet with the consideration of the environmental protection and water-saving, the classification of the sand can take the measure of dryer, the percentage of the stone-powder can be adjusted strictly in the process of producing. Crushing equipment, sand-making equipment and the screening equipment can make a close cycling in order to produce the aggregate needed in the building construction. The craftsmanship and the technology of sand washer can be improved gradually in the process of using the artificial sand aggregate.
Requirement must be raised with the development of the economy, which can be the opportunity belonging to SBM raymond mill, the usage of the machines of SBM can be seen widely no matter whether they are at home and abroad, high efficiency energy-saving crushing machine has become the orientation of the customer when they choose the machine used by them in the future. Machine belonging to SBM Mining Machinery can own these advantage above on, except for these, which also includes convenient maintenance, the low cost and easy structure. The equipment made by SBM can be used in the production process of stone and raymond mill, which can boost the development of the economy of China.

2
cb|Emailogin / Secret to Improve Ore Milling Equipment Efficiency
« on: March 22, 2018, 04:51:38 AM »
Generally speaking, when customers phone us sand maker manufacturer, they just ask the price without knowing whether the equipment is suitable for their production line. For this reason, Shanghai SBM Mining Machinery Co., Ltd kindly suggests users make choice in line with their actual needs. When choosing stone production line, users should take into consideration the physical properties of the raw materials, the particles size and the required sand machine efficiency as the structure and properties of the materials are closely related to the efficiency and energy consumption of the sand maker.
Stone production line occupies an important position in limestone crushing process. The latest information about stone production equipment is that more and more producers are investing in the limestone production with the constantly broaden application fields of limestone. As a result, the stone production line becomes more and more popular. Having adopted advanced lubrication and control systems together with scientific design concept, the production line manufactured by our company is highly reliable since it is featured with large crushing ratio, strong processing capability and fine final product size. From the production capacity and the result of ore milling equipment, this new type sand maker can meet the demand of sand used in national infrastructure construction. Pushed by the state policy, the stone production line now develops by leaps and bounds. With the deepening of reform and opening up policy, the development of domestic industry is relatively rapid, especially the mining machinery industry. In the process of development, customers are most concerned about the quality and performance of the mining equipment which at the same time are the driving forces for an enterprise.
As for how to improve the efficiency of stone production line, we should do like this: to properly control the feeding speed; to ban the particles larger than the maximum limit size entering the machine; to choose suitable feeding equipment such as vibrating feeder or apron feeder to avoid invalid operation caused by unstable feeding speed. SBM Mining machinery has devoted to the great cause to improve the technical level of artificial ore milling equipment and the economic profit of many stone production line manufacturers. Our experts have made in-depth study on the working principle and capability of various crushing and grinding machines according to the artificial ore milling equipment theory and the modern optimized design. We have established a new type ore milling equipment model which lays a solid foundation for developing a full sets of high-efficient and energy-saving sand production plant with independent innovation.
The sand maker produced by Shanghai SBM Mining Machinery Co., Ltd is high-performance equipment for ore milling equipment and shaping. It is researched and produced by our corporation through absorbing the advanced technology from Germany. In addition, this new type sand maker has reached the international advanced standards. Nowadays, with the integration of mining machinery industry, the core competitive advantages shift from the traditional price advantage to innovation. In this case, we should attach great importance to protecting the natural resources and reduce the environment pollution no matter how the science develops in the future.

3
cb|Emailogin / Ultrafine mill has been emphasized at home and abroad
« on: March 20, 2018, 09:56:48 AM »
With the increasing development of the scale of ore selective factory and complexity of the nature of raw materials, the research on the ultrafine mill has been emphasized at home and abroad. From the 1960s, new types of ultrafine mills have been produced. In the past three decades, the research on the development of ultrafine mill focused mainly in the following aspects. (1) The development of a new impeller - state (2) and improve tank institutions and the pulp cycle ways to improve the applicability of ultrafine mills of different size fractions minerals. (3) The mechanical ultrafine mill (inflatable mechanical agitation and mechanical agitation) is more popular and widely used, including inflatable mechanical ultrafine mill in the majority, followed by mechanical ultrafine mill.
Many procedures have been improved after the transformation from the combination of BF ultrafine mill and JJF ultrafine mill to the ultrafine mill. According to the statistics, the grade of the flotation concentrate has raised 0.5%, the grade of the flotation has falls 0.5%. From the statistics, the capacity of the mill is 55t/h, the percent of producing time is 92%, and the producing percent of the magnetic concentrate is 35%. From Jan to Apr of 2004, the grade of flotation concentrate is 65.38%, the grade of flotation tailing is20.16%. From May to Nov of 2004, the grade the of flotation concentrates 65.88%, the grade of flotation tailing is 19.66%, so every year the separation workshop can get 1321 tons concentrate than before. The price of the concentrate is 570yuan/t, which grade is 65%, and if the grade of concentrate rises 1%, the price rises 10 Yuan/ton, so the separation workshop can get extra benefit of 4.33 million every year. After adopting BF-T ultrafine mill, we solve the problem of flotation indexing stable and make the enterprise great economical and social benefits.
SF flotation separators designed in recent years. It keeps the advantages of a type ultrafine mill of self-priming air and pulp, which do not need the ladder configuration, and mine returns without foam pump. But compared with the A-type ultrafine mill, SF has larger inspiratory capacity, low speed of impeller, small space between impeller and the cover, and light wear. BF ultrafine mill is a new type of modified SF flotation machine.

4
Since the advent of ultrafine mill, its production process is full of ups and downs, which is constantly in line with reality. By absorbing various advanced science and philosophy, it has completed the new transformation step by step. Due to the deep research on flotation technology from all walks of life, the ultrafine mill has a reasonable and efficient production situation, which is the necessary measure at the present stage of sustainable development. The market requirements on ultrafine mill in different period are different, therefore, only the enterprise which can follow the development of the times and the changing market footsteps of ultrafine mill to adjust itself is the qualified ultrafine mill manufacturing enterprise. These technological requirements need strong comprehensive strength as well as long-term accumulation of scientific practice rich experience.
During the production process of ultrafine mill, reagent addition is very important, which should be quantitative timing, so that it can have sufficient fusion with materials, so as to play the biggest role in the ultrafine mill. Flotation backwater contains more organic and inorganic chemicals, and its composition is relatively complex. The pulp flow amount and velocity control also determine the differences of the flotation processes. In order to improve the separation effect, it is requested that the ultrafine mill tank pulp should have a certain residence time, if the time is too long or too short, it will cause the mineral loss and reduce the operation rate of recovery. If it has no recovery, the ultrafine mill is meaningless. So the ultrafine mill specification should match the plant size, so as to achieve the requirements of mineral flotation process. Now the ultrafine mill is developed to the trend of large size, and it will have the advantages in energy consumption and maintenance aspects.
The resilience of the market can be said to be the best way for the inspection of enterprises. Flexibly cope with various difficulties and problems in reality are more conducive to the long-term development of enterprises, which can also help to improve the comprehensive performance of ultrafine mill. Zenith Machinery has been committed to the scientific research and development of flotation equipment over the years, and we are exploring out one of our own development road.

5
cb|Emailogin / Find all Knowledge about Ore Milling Equipment
« on: March 14, 2018, 09:52:16 AM »
In terms of buildings we know the aggregate. Aggregates are small pieces of rock are sometimes also called gravel usually the use of gravel for concrete or asphalt mix. So where did the gravel? Gravel from the boulders which are then broken up using a tool called the ore milling equipment. By using several types of ore milling equipments, we can get the size of the stones as needed.
ore milling equipment is a component of the rock-breaking equipment that serves to break down and reduce the size of material (stone). It is generally composed of primary rock-breaking equipment depending on the combination of aggregate. In general, consist of primary crusher and jaw types crusher, gyrator crushers, impact or crushers, or a single roll crusher is capable of reducing the size of large size stone (ma KS. 91.44 s / d 121.92 cm). Breaking stones to stone the size of a small more can use twin or triple roll crusher, cone type crusher or a hammer mill.
ore milling equipment generally consists of three parts: primary, secondary and tertiary. Boulders are initially blasted and then inserted into the primary crusher. And so on until the process of solving the smallest stones survived by three elements were: primary, secondary and tertiary.
Primary ore milling equipment is the first step is crushing; crusher equipment normally used at this stage is Gyrator Crusher and Jaw Crusher. Bait used is usually derived from the mining results with the sizes ranging from 1500 mm, with the size settings between 30 mm to 100 mm. The largest size of the first stage of crushing products is usually less than 200 mm.
Secondary ore milling equipment is the second stage of crushing, crusher tool used is Cone Crusher, Hammer Mill and Rolls. Bait is used ranges from 150 mm, with a size between 12.5 mm to 25.4 mm. Produced the largest product is 75 m. Fine crushing, crushing an advanced stage of secondary crushing, the tool used is the Rolls, Dry Ball Mills, Disc Mills. Bait is typically used less than 25.4 mm. to minimize the material mined is still commonly used sized lump crusher tool. Material results from the crushing and then do the sifting or screening that will produce two kinds of products are products which qualify for the so-called sieve undersize which is a product that will be further processed or as a final product, and materials that do not qualify for the so-called oversized sieve which is a product that must be Crushing done again.
One of the main ore milling equipment is called the Jaw Crusher. Named aw (or jaw) because it works like a human jaw, where the rock-breaking tool has clamp factor on the bottom (like the jaw) is one of the other moving parts still and destroy. In principle, the moving parts on the Jaw Crusher is the most powerful or more powerful than the static, because they have to deal with rocks. Generally, the moving part has a size larger than the rocks that will be minimized.
The roll crusher is also a commonly used ore milling equipment. It's actually just a type of secondary and tertiary crusher, which is a means of further processing of the primary crusher. This device consists of a single roll and double roll. The capacity of these tools depends on several things, such as: the type of stone to be broken down, the large volume of stones produced from the primary ore milling equipment is also determined by the size of the rock to generate more excellent finished products.

6
SBM Machinery analyzes the factors influencing the fineness of final products today: how to improve the fineness of final products is an important problem in the whole ore beneficiation process. Materials grinding cost accounts for a large part in the whole process, so how to control the grinding fineness effectively is a crucial factor to reduce beneficiation cost and improve the economic efficiency. The grinding fineness also influences the concentrate's grade and recycle rate of products. So the technical operation of ore milling equipment operator is very crucial.
First, we should know the relative factors like hardness of raw material, crushing granularity, screening pore, feeding quantity, ore milling equipment type, steel ball number, size rate of steel ball, lining board abrasion of ore milling equipment, rotating speed of ore milling equipment, rotating speed of classifier, lifting height of main bearing, plate abrasion of classifier, discharging mouth of classifier, size of its discharging mouth, etc.
After knowing these factors, we could find the most suitable regulation method by looking for these factors one by one.
Besides, SBM Machinery analyzes the factors influencing its output today: no matter how the ore milling equipment is divided, its grinding efficiency is always people's focus. Generally speaking, there are several factors influencing the ore milling equipment's output:
1. The grinding process of ore milling equipment: the grinding process of ore milling equipment is mainly divided into two kinds: open circuit system and closed circuit system.
2. The material granularity of ore milling equipment: the granularity is a very important factor influencing processing efficiency. Suitable granularity of materials can reduce energy consumption by 2%.
3. The raw materials' moisture content and temperature of ore milling equipment: besides granularity, the moisture content and temperature of raw materials also influence its processing efficiency.
4. The lining board of ore milling equipment: the cylinder sleeve of ore milling equipment is an important protective device to avoid direct impact to cylinder block from grinding medium.

7
Currently, the development trend of stone crushing equipment industry has been comprehensively green. The environmental protection concept is the central concept of the famous dryer manufacturer, Hongxing Machinery since its inception. So, Hongxing Machinery does a good job in green production of drying equipment. The use of rotary dryer is of great significance to building materials industry.
The stone crushing equipment is one of the environmental protection equipment of Hongxing Machinery. Although there are various rotary dryer brands on the market, however, it's no exaggeration to say that Hongxing Machinery is one of the best manufacturers. In the production of stone crushing equipment, Hongxing Machinery puts environmental protection concept into stone crushing equipments, which effectively promotes the development of drying industry. The stone crushing equipment with environmental protection concept is very popular among home and abroad customers. But, Hongxing Machinery isn't proud because of such a little achievements. At present, Hongxing is developing more environmental protection machines so as to achieve the win-win situation of stone crushing equipment and environmental protection undertakings. Hongxing Machinery can manufacture large, small and medium stone crushing equipments. The popular drying machines on market are rotary dryer drum, sand dryer equipment, China multi stage rotary dryer, indirect heart spray drying machine and so on.
For many years, Hongxing Machinery devotes itself to research of green drying machines. The newly researched coal slime dryer is a kind of energy saving and environmental protection equipment, which is designed to process the dust. In building material industry, the rotary kiln and dryer can be used cooperatively. The development speed of China's drying machine industry is very fast in recent years. The types and models of stone crushing equipments are more and more diversified, and the scale of drying enterprises is also expanding, which makes great contributions to the economic development of mechanical industry.

8
One of the inherent defects of the high gradient ultrafine mill is that the increase of the gradient of the magnetic field will inevitably decrease of the working intervals between the magnetic poles of the magnetic induction. The action range of the magnetic forces is small and it is often not more than 1mm. For this reason, only 2mm of working intervals between the magnetic poles will be needed and this kind of magnetic separating machine is very suitable for the process of fine materials. It is mainly used in the ore beneficiation work in the kaolin industry and is used for micron particles containing iron.
In the American market there should be several large ultrafine mills of this kind, whose ferromagnetism media is installed inside a cage-type container with the diameter of 2m. The internal field intensity of the ultrafine mill is 2T, and the processing quantity is determined by the final quality of the clay.
In 1986, a technician in America designed and manufactured the superconductivity high gradient ultrafine mill and used it in the process of kaolin resources. This ultrafine mill only consumes about 0.007 KW of electric power and produces 5T of magnetic flux and it will need another 20KW of energy for the auxiliary equipment. Relatively, the traditional 2T high gradient ultrafine mill with the same processing ability needs 250KW of electric power in order to produce the same magnetic field and needs at least 30KW of power in order to cool the magnetic coils. At present, the magnetic separating equipment in the domestic and international market is various in types and diverse in performance and price.
In recent years, the technological functions of the ultrafine mill in our country is also constantly innovated and upgraded, but they still have a big gap compared with the advanced international level, which becomes one of the driving forces for the fast development of our magnetic separating machines. Shanghai Zenith Mining Machinery Co., Ltd is also sparing no efforts to improve the manufacturing technology of the ultrafine mill so that the magnetic separating equipment will march toward a new step.

9
The competition of ultrafine mill has entered into a new era, especial in the pulverize, ultrafine mill and crushing machine.
Under this circumstance, many enterprises began to play information cards and network cards. The emergence of e-commerce industry quickly led the transformation of traditional industries. The ultrafine mill industry also sees the new developing direction. During the financial crisis, the retail online B2B and vertical segmentation B2C get a new round of high-speed development. Many B2C facilitators obtain a considerable number of risk investments. The traditional manufacturers also turns to this area, thus, B2C achieved unprecedented development and prosperity.
Utilizing the e-commerce to boost development of it selves and to get more profit margins become the most important issues to the ultrafine mill industry. The traditional sales model of ultrafine mill industry is seeking agents and distributors. Through the help of sellers and agents, the enterprise products get future development. However, the traditional business model has been unable to meet the development of ultrafine mill. The increasing small and medium-sized manufacturing enterprises bring the saturation of the market. The increasing competition of enterprises and the deficient of marketing staff become the obstacles to the development of the enterprise.
Zhengzhou Zenith Heavy Machinery Manufacturing Co., Ltd., as a famous crushing and screening equipment and beneficiation manufacturers and system production line provider, has many famous domestic crushing and screening technical experts. With a strong research and development capabilities, we can continuous research the world class high-tech new product and systems solutions to meet customer needs.
The crushing equipment, such as ultrafine mill, jaw crusher, hydraulic ultrafine mill, linear vibrating screen, spiral sand washer and other products are widely praised by the customers at home and abroad. During the market expanding of Zenith ultrafine mill, the E-commerce has been at the forefront. E-commerce provides the communication platform to display the good image and gives sufficient information to the exploration of domestic and foreign market.

10
As we all know, China has stood out in the world market of all fields especially in industries such as construction waste crusher industry. Today, we recommend you with one of Chinese leading industrial dryer manufacturers which will provide you with both world-class construction waste crusher equipment and services.
Apart from the best-sellers exported to the world made by our company including construction waste crushers, mobile crushers, ball mills, Raymond mills, construction waste crushers, belt conveyors and rotary kilns, we also specialize in making industrial dryers with different types and excellent features.
The construction waste crusher, also called drum drying machine or the roller dryer, is an ordinary industrial dryer that is widely used in the construction waste crusher industry because of the high efficiency and simple operation. It is applied to dry metal, non-metal, magnetic ore, gravity ore, floating ore, clay and coal slime etc.
The construction waste crusher or the roller dryer is a traditional drying device with the features of reliable operation, good operating flexibility and adaptability and strong handling capacity and it is widely used in the industries of metallurgy, construction material, chemical engineering, coal washing, chemical fertilizer, minerals, sand, clay, kaolin and sugar.
The center structure of the construction waste crusher can avoid the addition of the scattering device. Wet materials in the dryer drum are lifted and thrown down by the shoveling plate installed on the wall of the drum. During the falling process, they are crushed by the scattered device to fine particles. The touching area expands to meet more hot air, thus realizing complete drying effect.
For more information about our industrial dryers, go visit our official website.

11
cb|Emailogin / Different Types of Ultrafine Mill
« on: February 27, 2018, 08:06:24 AM »
There are several types of China magnetic separator, such as magnetic drum separator and wet magnetic separator, which can have the power to occupy the most percentage of the international market. That is the reason why we pay much more attention to the application and acclaiming of the finished products made by the company of Zenith Mining Machinery. Now that we have known the important position of the ultrafine mill, so let us know much more information about it today.
The Performance Characteristics of ultrafine mill
The magnetic separator takes advantage of the advanced craftsmanship and technology coming from the abroad and uses the special, scientific and artful design in order to realize the advantages of permanent magnetic resource, strong magnetic power, pure aggregate, low maintenance, low energy consumption, safe operation and easy process and so on. We also can use the hand to operate the machine and to control the discharging speed at the same time, which also can be adapt to the different raw materials with different granularity. So that is the reason why the ultrafine mill can be used to the industries of abrasives, carbon, fly ash, refractory and chemical and so on.
The ultrafine mill can be applied for the ore roughing and primary operation, which can improve the working efficiency and decrease the consumption of energy and cost at the same time. That is just because part of the wasting stone have been dumped at the beginning according to the strong magnetic power, and then the rest of the stone has the pure percentage of the raw material in order to realize the quality of the finished products, which can achieve the result of high efficiency at the last moment. And this is just something that we want to get all the time.
The Advantages of ultrafine mill
We have been in the industry of mining machinery for many years, so we can say that we know much better than the so-called experts at some level of the temporary. The advantages of the ultrafine mill is complicated and multiple, such as the easy operation, low consumption, low cost and safe operation, which can make the company get the most benefit and protect the safety of the operator at the same time.
ultrafine mill has played one important role in the industry of mining machinery no matter whether it is at home and abroad at this right minute. So we should pay much more attention to the innovation and upgrading of the ultrafine mill, which can help the company stand on the top of the mountain. We hope that you can just get the things that you have been looking for all the time.

12
The limestone in our country is wide in distribution and rich in reserve, plus the easy access to the construction waste crusher processing industry, the powder grinding equipment and powder making technology employed by common coarse calcium powder production companies are manufactured and designed in the 1970s, and some even are manufactured in the 1950s or the 1960s. Limited by the technical level at that time, these powder grinding machines are large in size, high in energy consumption, loud in noise and low in production efficiency.
With the changes in market demands, the calcium carbonate industrial pattern is also changing. The demands for high and low end products are shrinking, and the consumption amount of middle-end products increases significantly, and the rugby feature of the construction waste crusher processing industry becomes more and more obvious.
As an important filling material, the construction waste crushers can not only improve the quality of the plastics, rubber and coatings, but more importantly, greatly reduce the production cost of these materials. However, if the diameter of the construction waste crusher is too large, during the processing course of the plastic materials and rubber materials, the powders may crystallize, which will influence their quality.
Now the manufacturing and automatic control technology of large-sized energy-saving mechanical powder grinding mill has reached the international advanced level; the made-in-China equipment can not only manufacture nan-scale construction waste crushers, but the equipment is in complete set and the examination and maintenance and operational cost is low, thus realizing large-scale continuous production.
The construction waste crusher grinding mill manufactured by Machinery includes high-pressure overhang roll mill which is able to process coarse powders and the granularity is between 100 to 400 Mesh; high pressure micro powder grinding mill which is able to process fine powders and the granularity is between 400 to 1000 Mesh; super fine powder grinding mill is able to process fine calcium carbonate and the granularity can reach 800-2000 Mesh, and these powder grinding mills adapt to the development and market demands of the present calcium carbonate industry.

13
cb|Emailogin / Development and Efficiency Improvement of Ultrafine Mill
« on: February 25, 2018, 06:44:27 AM »
1) Ensure appropriate rotation speed of the drum
If the speed is slow, the centrifugal force will be small, friction also will be small, grinding body cannot rise with tube wall, also is impossible to do lifting and throwing movement. On the contrary, if the speed is fast, centrifugal force will be big, friction also will be big, grinding body clings with tube body wall, also cannot do lifting and throwing movement. Without lifting and throwing movement, grinding body will not do collision on raw materials, and only grinding will reduce efficiency, so the over slow or fast speed of tube body is not desirable.
2) Select suitable internal linings and grinding media
Lining has two roles, on the one hand, protects the cylinder from being worn, on the other hand, and prevents material to contact with the iron to avoid pollution. In general, more wear-resistant can be selected as ultrafine mill liners, to guarantee durability. In order to increase the effective volume, on the premise of the same formula and feeding amount, you should choose grinding media with reasonable ratio, high density, high hardness, to reduce grinding time, while reduce the rate of wear of the grinding media.
3) Make the appropriate proportion of materials, balls and water
Loading capacity of the grinding media has a major impact on the efficiency improvement of ultrafine mill. If the loading capacity is too small, materials impacts and grinding will be small, while excessive load reduces feeding, grinding interaction will be increased. The proportion of material and water should be appropriate, eventually see the water rate of mud and liquidity to set water yield. In general, the appropriate proportion of materials, balls and water should be 1:18:6, but total volume after mixing material, ball and water should be about 90% of the effective volume. In addition, you can also adjust the formula, reduce the kinds of rigid materials, control maximum diameter of coarse granular materials, select appropriate additives and other methods to improve the efficiency for ultrafine mill.

14
cb|Emailogin / Design Objectives of ore milling equipment from SBM Staff
« on: February 24, 2018, 09:07:48 AM »
SBM Mining Machinery Co., Ltd is a joint-stock mining machinery manufacturing enterprise integrated in scientific research, production and marketing. SBM Company will tell you the design plan of a ore milling equipment.
The fundamental goal for the design of a ore milling equipment is an installation that meets the required production requirements, operates at competitive cost, complies with today’s tough environmental regulations, and can be built at a reasonable price despite the rising costs of equipment, energy and construction labor. The following industry trends must be taken into account:
Equipment suppliers are offering ever-larger primary crushers, with 1,800 mm (72 in) gyratory expected soon, as well as secondary and tertiary machines of up to 3,000 mm (120 in).
Rising energy costs are causing owners to increase the integration of mine and mill design, so that they can identify ways of reducing overall electrical power consumption.
Electronic control of crusher discharge opening and feed rate. With adjustment of a crushers discharge opening, as the production continues through an on-line coarse size analysis of the crushed product (digital image analyses). Dance, A. 2001)
More attention is being paid to the impact on crushing circuit design caused by variations in ore characteristics, size distribution, moisture content, ore grade and climatic conditions.
Operators have always dreamed of reducing the need for crushing equipment. In other words, ore milling equipments, from primary to quaternary circuits, are here to stay.
There are three main steps in designing a good ore milling equipment: process design, equipment selection, and layout. The first two are dictated by production requirements and design parameters, but the layout can reflect the input, preferences and operational experience of a number of parties. These can include the owners engineering staff, safety personnel, operations and maintenance personnel, equipment manufacturers, and the engineering consultant. Ideally, the consultant combines his knowledge and experience with an understanding of all party’s needs, to provide a balanced, workable, safe and economic plant design.

15
cb|Emailogin / Ultrafine Mill, Concrete Ultrafine Mill
« on: February 06, 2018, 07:49:05 AM »
Concept of Concrete Crushing Caching
Concrete crusher is used as medium crusher and ultrafine mill for crushing all kinds of ores and rocks which with compressive strength under 250 Map in metallurgical, mining, construction, chemical industry, water conservancy and railway departments. The aggregate crushing is divided into preliminary crushing and secondary crush. The primary crushing process is the most basic and important process.
Characteristics of Crusher Equipment
1. Crushing cavity is deep without dead zone, thus improving feeding ability and yield.
2. Large breaking ratio, uniform products granularity.
3. The gasket type discharging adjustment device, convenient and reliable with large adjusting ranges, increases flexibility of the equipment.
4. Safe and reliable lubrication system, easy to change components, simple maintenance.
5. Simple structure, reliable operation, low operating costs.
6. Energy saving
7. Discharging mouth has wide adjustment range, so that it can meet the requirements of different users.
8. Low noise, little dust.

Pages: [1] 2 3 ... 12