Author Topic: the floor  (Read 282 times)


  • Newbie
  • *
  • Posts: 22
    • View Profile
the floor
« on: October 11, 2017, 11:57:57 AM »
the floor requirements are very strict, geothermal floor must have good heat transfer performance, good thermal stability, environmental performance is better, good resistance to deformation "four good" requirements. It is recommended to choose composite flooring. Because the thickness of the composite floor is mostly in the 7 ~ 8mm, it is easy to heat generated by the geothermal system to the surface, and the composite floor of the metal oxide wear layer, the heat spread on the surface very fast and uniform. And solid wood flooring is relatively thick, the general thickness of about 2cm, but also to install the keel, so the heat of the geothermal system is not easy to conduct to the surface, and the thermal conductivity of wood is very low, this will lead to waste of heat, but also the surface temperature Uneven, the temperature difference is very obvious. The quality of imported flooring to meet the European Enpr13329 standard, the quality of domestic flooring to meet the national standards, can be adapted to the installation of geothermal heating floor technical requirements, the current market, some qualified brands have reached this standard. The effect of the lock floor is better, because there is a small gap between the hook and the floor, so it is not easy to take shape after expansion. In order to increase the amount of heat, the cushion material and the thickness of the floor should not be too thick.
wood plastic composite manufacturers in germany
best composite decks to use
wpc cladding uk
4 point 5 tongue and grove treated lumber